Microstrip antennae for open resonators excitation

Authors

  • N. A. Pershin National Technical University of Ukraine "Kyiv Polytechnic Institute", Ukraine
  • Ruslan V. Antipenko National Technical University of Ukraine "Kyiv Polytechnic Institute", Ukraine https://orcid.org/0000-0002-8931-1977
  • Yevgen A. Machussky National Technical University of Ukraine "Kyiv Polytechnic Institute", Ukraine https://orcid.org/0000-0001-5467-6426
  • A. A. Parphenov National Technical University of Ukraine "Kyiv Polytechnic Institute", Ukraine

DOI:

https://doi.org/10.1109/ICATT.1997.1235231

Abstract

Investigating the open resonant systems is of practical interest for creating microwave oscillators. The active elements of such units may be arranged either outside the open resonator or on the surfaces of its mirrors. For coupling with resonator both outside emitting structures relative to the oscillator module and inner circuits of this oscillator module are used [1, 2]. In the latter case the inner circuits provide the oscillator selfexciting and its coupling with the open resonator.

References

Kawasaki S.; Itoh, T. Quasi-optical planar arrays with FETs and slots. IEEE Trans. Microwave Theory Tech., Oct. 1993, Vol. 41, p. 1838-1844.

Kotserzhinskii, B.A.; Machuskii, E.A.; Pershin, N.A.; Taranenko, V.P. Solid-state oscillators with quasioptical resonant systems. Radioelectronics and Communications Systems, 1987, Vol. 30, No. 10, p. 11-20.

Kotserzhinskii, B.A.; Pershin, N.A.; Taranenko, V.P. Experimental investigation and modeling of the oscillatory systems open-resonator solid-state generators. Radioelectronics and Communications Systems, 1985, Vol. 28, No. 10, p. 46-51.

1997 cover of Proc.

Published

1997-05-24

Issue

1997: ICATT’97 - Proc. of II Int. Conf. on Antenna Theory and Techniques

Section

Microwave components and circuits, fiber-optic links