Shaper of SHF radio pulses on the base of travelling wave resonator

Authors

  • Viktor V. Salamatin Sevastopol National Technical University, Ukraine
  • Grigoriy A. Lukyanchuk Sevastopol National Technical University, Ukraine

DOI:

https://doi.org/10.1109/ICATT.2003.1238808

Keywords:

microwave devices, pulse shaping, resonators, slot lines, transients, waveguide couplers

Abstract

The paper presents the results of an investigation of the transient processes in a travelling wave resonator. We consider the possibility of short SHF radio pulse shaping by energy extraction from the resonant ring with the help of a waveguide slot bridge. The slot has a shutter that opens and closes periodically.

References

Semenov, N.A. Technical Electrodynamics. M.: Svyaz, 1973, 480 p.

Lukyanchuk, G.A.; Salamatin, V.V. Primenenie resonatora begushey volni dlya izmereniya napravlennosti otvetvitelya. Proc. of 7th Int. Forum on Radioelektronika I molodezg v XXI veke. Kharkov, 2003, Vol. 1, p. 500.

Alybin, V.G. Problemy sozdaniya SVH zashitnih ustroystv dlya radiolokacii i svyazi. Proc. of 12th Int. Conf. on SHF teknika I telekommunikacionnie tehnologii, 9-13 Sept. 2002, Sevastopol, Ukraine. Sevastopol, 2002, pp. 15-21.

Bakeman, P.E. Fast high power octave band width X-band waveguide microwave switch. IEEE MTT-S Int. Microwave Symp., Cherry Hill, 1976, pp. 154-156.

ICATT 2003 cover

Published

2003-09-26

Issue

Vol. 2 (2003): ICATT’2003 - Proc. of IV Int. Conf. on Antenna Theory and Techniques

Section

Broadband, multi-frequency antennas and remote sensing antennas