Four-channel strip power dividers

Authors

  • Sergiy Ye. Martynyuk National Technical University of Ukraine "Kyiv Polytechnic Institute", Ukraine https://orcid.org/0000-0002-1920-8755
  • Petro Ya. Stepanenko National Technical University of Ukraine "Kyiv Polytechnic Institute", Ukraine
  • V. M. Tereshchenko National Technical University of Ukraine "Kyiv Polytechnic Institute", Ukraine

DOI:

https://doi.org/10.1109/ICATT.2003.1238870

Keywords:

multichannel power divider, strip line, finite-difference time-domain method, FDTD

Abstract

The finite-difference time-domain method has been applied successfully for electrodynamic analysis of the four-channel strip power divider taking into account finite losses in the dielectric substrate and the presence of a metal box. A test sample of the power divider was designed and manufactured. Results of its theoretical and experimental investigations are in good agreement.

References

Gostev, V.V.; Konin, B.B.; Matsepura, A.L. Linear multichannel microwave devices. K.: Radioamator, 1997, 316 p. (in Russian, ed. by V. V. Gostev).

Yee, K.S. Numerical solution of initial boundary value problems involving Maxwell’s equations in isotropic media. IEEE Trans., 1966, Vol. AP-14, No. 2, p. 302-307.

Dubrovka, F.F.; Martynyuk, S.E. Analysis of multilayered metal-dielectric structures by finite difference time-domain method. Izv. VUZ. Radioelektronika, 2002, Vol. 45, No. 7, p. 22-30.

ICATT 2003 cover

Published

2003-09-28

Issue

Vol. 2 (2003): ICATT’2003 - Proc. of IV Int. Conf. on Antenna Theory and Techniques

Section

Microwave components and circuits, fiber-optic links