Optimization of parameters of resonance system based on transverse slots in the rectangular waveguide with slow-wave structure

Authors

DOI:

https://doi.org/10.1109/ICATT.2013.6650711

Keywords:

transversal slots, shorting plunger, radiation coefficient

Abstract

The system of resonant transverse slots of equal length on the basis of a rectangular waveguide slow-wave structure and short-circuiting plunger at the waveguide end is considered in the article. Slow-wave structure formed as a dielectric layer arranged parallel to the broad wall of the waveguide. It is shown that such a system can be configured for maximum radiation at the resonant frequency by optimizing of such parameters as distance from the short-circuiting plunger and the length of the slots in the array. The usage of the slow-wave structure in waveguide results in radiation pattern of the antenna array without any higher order interference maxima.

References

FELD, Y.N.; BENENSON, L.S. Antenna-Feeder Devices. Moscow: N.E. Zhukovsky Academy Edition, 1959 [in Russian].

BLINOVA, N.K. Optimization of the parameters transverse slot cut in the broad wall of a rectangular waveguide short-circuiting plunger at the end. Visnik KhNU. Ser. Radiofizika ta Elektronika, 2012, v.220, n.1010, p.19-22.

YATSUK, L.P.; BLINOVA, N.K.; ZHIRONKINA, A.V. Mathematical model of a linear system of slots in the waveguide with arbitrary reflective load. Radiotekhnika, 1992, n.7-8, p.73-78.

Published

2014-02-19